Flat Roofing

We supply and fit all manner of Flat Roof and the materials/construction used will vary dependant upon the budget, below are details of several options available

Ethylene propylene diene monomer rubber (EPDM) :   We supply and fit all style of Flat Roof this EPDM roof is designed to be cost effective and much faster than traditional roofing systems. For most applications, the membrane is cut to the size of your roof and supplied as one single piece, trimmed to size and finished off with the correct drip, kerb edge and wall up-stand trims.

Single-ply membrane: PVC:  This roofing system is highly reflective and very durable. PVC is one of the top flat roof options because it is easy to install and lacks water permeability, meaning it can resist water ponding. It’s three main benefits are very comparable to number 5 on the list, spray-applied roof coatings. The problem with PVC, and the biggest difference from roof coatings, is that it is applied in rolls, and therefore it has seams that can lead to roof failure. When it is rolled out, these seams must be taped or glued together. While this may resist water for a while, it will not hold up for 10-15 years as a seamless roofing system would.

Modified Bitumen: This is a single ply roofing system that is often rolled onto the roof surface. The older systems require the material to be laid on the roof and then heated with a blowtorch. This is obviously a dangerous installation method, so newer systems have been designed that allow the material to be peeled and stuck to the roof surface. This is one of the more environmentally friendly flat roof options as it reflects the sun and therefore cuts back on energy costs. However, this system is not very scuff or tear-resistant and cannot resist much foot traffic once applied.